Universal lightweight climber with an aero edge. It’s just the right depth to cover hills at speed.
• 40 mm section rims, aerodynamically optimized
• Best with 26-28mm tire, will accommodate 25-43mm tires
• Wheelset weight 1350 g, with tape and valves
• Tubeless-ready – tape and high-quality aluminum valve pre-installed
• Cenos Ova R hubs, straightpull, 36T ratchet technology, NTN (Japan), and TPI (Taiwan) high-quality LLU sealed bearings
• Can be used for gravel
• Sapim CX-Ray aerodynamic spokes with Sapim Secure-Lock nipples prevent loss of spoke tension
€1229
| Model | Cenos Ova R, ratchet freehub |
| Axle Front | 12×100 |
| Axle Rear | 12×142 |
| Brake interface | Centerlock |
| Body | Shimano Road 11-12s / Sram XDR |
| Height | 40 mm |
| Width | 29 mm |
| Internal width | 21 mm |
| ERD | 558.5mm |
| Weight | 380g |
| Spokes | 24 |
| Spoke tension | 1100 N |
| Recommended tires | 25-43 mm |
| Maximum pressure | 9 Bar / 130psi |
| Maximum system weight | 110 kg |
| Tubeless ready | Yes |
| Rim type | Hooked |
| Spokes | Sapim CX-Sprint |
| Spoke count front | 24 |
| Spoke count rear | 24 |
| Nipples | Sapim Polyax Alu Secure Lock |
Our desire for bike wheels came from the experience of working on them. It is fascinating how alive and subtle wheels can be. We built our wheels with the utmost care and attention. Spoke tension is specifically adjusted to best fit each setup. Only the best tools are used in every part of the process. We build only with Sapim spokes.
We build our wheels so we could sign on them. So we do.
All Cenos products are developed weight being one of the top priorities. We have developed an Advanced Carbon Layering (ACL) technology which allows to significantly reduce rim weight while maintaining the stiffness and durability. Lighter rims helps to accelerate faster and allow to brake later.
We have designed a custom Easy Tire Lock (ETL) rim profile for easy tire mounting. Custom-shaped groove allows much easier tubeless tire inflation and lets the tire stay locked even when deflated. This helps to easily add sealant through the valve core. In combination with a wide profile, most of the tubeless tires can be (dis)mounted without levers and only with a floor pump.
Every wheelset is a system of at least 50 components. Therefore the building quality is essential. All Cenos wheelsets are hand-built by experienced assemblers in Lithuania. We build our wheels so we could sign on them. So we do.
